Search results

Driver's Door / Central Locking System acting neurotically... SOLVED Hi gang ! I just replaced the motor in the power lock actuator of my driver's door thanks to a free aftermarket motor from the most generous CandiMan :) The original problem was that the actuator was not locking the front...

Disco ABS Sensor Repair Procedure - Uploaded to RapidShare (see details) >>>UPDATE<<< I just uploaded the ABS Sensor Repair Procedure file to the RapidShare file hosting service. The .pdf file has been compressed into .zip format so you will need a .zip utility to extract it. You can...

A few weeks ago I repaired a set of D1 ABS sensors for a member here. As I said in an earlier post, I will be posting the procedure, along with some pics for those interested in saving themselves hundreds of dollars in replacement costs. I'm talking about the front sensors, which, due to poor...

Hey gang ! I've been away for months thanks to trouble free driving except for a couple of CEL incidents that I cleared with my OBD II scanner :) A few days ago, I noticed (luckily) that when I used the remote to lock the truck, the front driver's door was not locking :( All the other doors...

In case anyone is interested, I recently went through a nightmare with my 96 D1 ABS system. The brakes worked fine, but the ABS light came on 4 months ago and I couldn't get the problem fixed and the light extinguished. The original blink code was for the left rear sensor air gap. I fiddled...

Earlier this summer my ABS light came on during a camping trip. After posting a message here, I was led to believe it was an ABS sensor issue. I used the "paperclip jumper in the OBD connector" to retrieve the fault code which was 2-13. According to the blink code list, this is a Left Rear...

According to the blinky blinky ABS codes list on the Rovers North site: Fault Code/Location: 2-13 Rear Left Cause: Sensor Air Gap too Large/Sensor has been pushed outwards by exciter ring Remedy: Run out on sensor rings due to rough roads/potholes, installation Check bearing freeplay, or...

OK, so I got the annoying ABS light a while back. After a little research here I used the paperclip in the OBD connector method and got a 2-13 code, which indicates a Left Rear ABS sensor gap problem. Crawled under the truck this afternoon and followed the lone wire to what appears to be the...

See my message: http://www.discoweb.org/forums/showthread.php?t=38613

Test

If someone reads this can you do me a quick favor and post the text below to the Discovery - Technical Discussions forum... For reasons that I don't understand, I can't post new threads there but I can in this forum. I've sent an e-mail to the admin but got no reply :( Thanks ! Kev...

I've been unable to post a new thread to the Discovery Forum for a couple of days. Trying a test here to see if this works. Sorry Kev

I have a '96 Disco 4.0 L Auto and I'm now having problems with the ABS. The ABS light came on last week coming back from camping, but the brakes work fine. Normally, the ABS light comes on at startup and then extinguishes once you start rolling (I think the owner's manual it turns off once you...

I've got a '96 Disco and the latest problem is with the power window(s)... The windows freeze shut in the nasty Canadian winter and the power window motor is apparently stronger than the window raising mechanism ;) I think I should change the outer window seals, but that's not the immediate...

I've got a '96 Disco and the latest problem is with the power window(s)... The windows freeze shut in the nasty Canadian winter and the power window motor is apparently stronger than the window raising mechanism ;) I think I should change the outer window seals, but that's not the immediate...