Search results

I first pulled the half shafts first because I thought that is what I broke. Pretty much same on the disco except with the alloy wheels you need to take them off first to get to the half shafts. I then pulled the propshaft so in case whatever was broken in the diff jammed or siezed I would not...

Yes that was the concensus about locked cdl hurting the transmission. I don't believe in coincidences though. Never had a problem with the trans., drove it for 2 1/2 weeks with locked cdl and then it started delay shifting. Fluid is good. Could be a combination of a minor problem I didn't...

Buddy, yep that was me. Thanks for pulling out the trailer on Sunday. Yea, I got a used diff and replaced it about 2 1/2 weeks later. I pulled the axles and the rear prop shaft and drove around in front wheel drive. I am currently rebuilding the old diff for shits and giggles. I don't...

Looking for a transmission - 98 disco Ship to 21701 Thanks

Thansk for all the info. I am driving in front wheel drive. I finally got the peg off the new diff flange, put the new diff in, axles in and ran out of daylight. Hopefully tomorrow I will have everything in tomorrow and this problem will be gone.

2 oil changes ago. Probably about 6-8k. I had no problems with the trans. and for the past 2 weeks it has been driving fine. Got in this morning and that is when I noticed the problem as I was driving to work. Fluid is nice a pink. The used diff I got had the 3-flange rotoflex pinion...

98 disco Auto Stock Gears 235/85 16 tires Broke diff, removed rear axle, removed propshaft, locked cdl It has been two weeks, transmission just started to feel like I am starting off in 4 gear for a second or two and then goes back to normal. Sometimes I step on gas and there is a delay in...

Is the ARB 3rd sold?

Barefoot, I am interested in the diff you have. Let me know what you need me to do fo shipping costs. You can email me at jim@jtdylaninc.com

The way I understand the description on the website the screw ends are pointed and they register in a matching countersunk hole in the pad. All of which is held in place between the crown gear and taped screws. Just a guess though

Thanks. The ashcroft pegging on the diff is interesting. I might have to play around and try to do it myself. Will probably end up of purchasing a used one and then rebuild the one I broke for experience. I can't afford to change the ratio in the both diffs right now and buy an arb for the...

Nope didn't make it up without the gas which is why I broke the diff. (too much at wrong time) I made it up both hills on the east river trail, had lunch and then decided to do the hill climb. Live and learn.

Did it on the Hill Climb by the Causeway on Friday Afternoon at MAR. I was taking it easy on the gas because I just put on 235/85 and didn't want to break anything until I saved some money for upgrades. I was thinking about ARB and I am waiting to get a price from GBR on Monday. Also...

Blew my rear diff on a '98 Disco: -Crown and Pinion Shot -Housing Cracked -Diff gears missing teeth -Cross Shaft in 4 pieces Is it worth sourcing the parts and rebuilding it? Is it worth the time? I was able to pick up a crown and pinion set for $60 at MAR and I can get the rest for under $400.

Have you greased your propshafts recently? Excess grease from propshafts can spin onto cats.

I have bought 2 rear quarter windows from these guys. Quick and easy. http://www.carcannibal.com/rover/

Thanks. Should I worry about the new noise...timing chain loose?

Did a search...didn't answer my question 98 Disco Auto Runs good Running 10w40 for this trip (normally 5w30) All fluids just changed New NGK plugs and wires Heading to OBX (about 400miles trip) Three hours in engine starts to loose power...I know its the VSS have had intemittent problems...

Check your brake light swith attached to brake pedal. You can jump the leads to check if it bad.

Should be in with your owners manual